44
Boot Other Device (Enabled)
If you enable this item, the system will search all other
possible locations for an operating system if it fails to find one
in the devices specified under the first, second and third boot
devices.
Swap Floppy Drive (Disabled)
If you have two floppy diskette drives in your system, this item
allows you to swap the assigned drive letters so that drive A
becomes drive B, and drive B becomes drive A.
Boot Up Floppy Seek (Enabled)
If this item is enabled, it checks the geometry of the floppy
disk drives at start-up time. You don’t need to enable this item
unless you have a legacy diskette drive with 360K capacity.
Boot Up NumLock Status (On)
This item defi nes if the keyboard Num Lock key is active when
your system is started.
Gate A20 Option (Normal)
This item defines how the system handles legacy software
that was written for an earlier generation of processors. Leave
this item at the default value.
Typematic Rate Setting (Disabled)
If this item is enabled, you can use the following two items to
set the typematic rate and the typematic delay settings for
your keyboard.
Typematic Rate (Chars/Sec) (6)
If Typematic Rate Setting is enabled, you can use this item to
define how many characters per second are generated by a
held-down key.
Typematic Rate (Msec) (250)
If Typematic Rate Setting is enabled, you can use this item to
define how many milliseconds must elapse before a held-
down key begins generating repeat characters.
