ENGLISH
EN
24
• After establishing the correct position of the
left bushing pin (G), hold the left bushing pin
with one hand (G) and with the other, tighten
the ring (F) (fig. 20) thus clamping everything.
• Close the lever (I) in the “close” position,
pushing it only with the palm of the hand (fig.
21 and 22) and taking care not to put fingers
between the lever and frame (fig. 23).
• Make sure the lever of the quick release is
inside the grooves of the left bushing pin (G)
(fig. 24).
• If the wheel is too far away with respect to
the middle of the roller (fig. 25), shift the resi-
stance unit (J) by loosening the unit fixing
screws (K) and secure them in the more cor-
rect position (fig. 26 and 27).
• Tighten the adjustment screw (Ref. B) on the
support plate until the roller touches the
wheel (fig. 28).
F
G
I
I
I
20
21
22
23
OK
NO
G
24
K
K
J
25
K
K
26
=
=
27