Elite EL-110 LP, Installation Manual

Page: 60 / 88

59
Boiler Manual
PART 10. START-UP PROCEDURE
(CONTINUED)
Note: For the following functions you must have
your maintenance function turned on.
Function 33
Year
SERVICE SCHEDULE
YEAR 00/00/2000
33
Description: This parameter sets the year of the
next service reminder
Hours:
SERVICE SCHEDULE
10000’s
O
000000h 33
Description: This parameter sets the 2 left digits
of the amount of run hours for the next service
reminder
Function 34
SERVICE SCHEDULE
MONTH 00/00/2000
34
Description: If you selected the date function
you will need to program the month or if you
selected the run hour function you will need to
program 10,000 hours if required.
SERVICE SCHEDULE
10000’s 00
O
0000h 34
Description: This parameter sets the 2 middle
digits of the amount of run hours for the next
service reminder
Function 35
SERVICE SCHEDULE
DAY 00/00/2000
35
Description:
SERVICE SCHEDULE
1’S 0000
O
00h 35
Description: This parameter sets the 2 right dig-
its of the amount of run hours for the next serv-
ice reminder.*
Function 36
TELEPHONE #
000 000 0000
36
Description: Allows the user to input a tele-
phone number that will be displayed when
maintenance is required.
RESETTING THE MAINTENANCE SCHEDULE
When the system control flashes MAINTE-
NANCE REQUIRED, it is advisable that you call
for service. After the service is performed, reset
the schedule for the next required service by
using the following steps.
Press ENTER on the display for 3 seconds. The
Menu code will appear as 000. This does not
change. Press ENTER again. SERVICE SCHED-
ULE RESET will be displayed. Using the right
arrow key
scroll to the selection of Year or
Hours, Select Enter to Reset the mode you are
in. Use the up
or down arrow key for each
adjustment then select ENTER when reset is
complete.