Elite Greenhouses WIDE MAXIM, Instructions & Illustrations

Page: 23 / 28

GLAZING THE STRUCTURE
Always handle glass with extreme care as failure to do so can result in injury.
HORTICULTURAL GLASS and MULTI-SHEET TOUGHENED
GLASS
1.
Starting with the bottom pane of one side, offer the pane to the glazing bars. Hold it in place
by inserting two of the stainless steel clips six inches from the bottom of the glass.
2.
Secure the glass by inserting another two clips
in the same way half an inch from the top edge of the
glass.
N.B. The side panels will require a larger over-
lap of approx ¾” (20mm).
3.
Hook one overlap clip on the middle of the
pane of glass. (Key point).
4.
Offer the top pane of glass to the glazing bars,
resting it on the two clips of the bottom pane. Insert
two wire clips to hold it six inches from the bottom of the pane. Bend the middle overlap clip up-
wards to support the glass. Secure the pane by inserting another two clips four inches from the top
of the pane.
Repeat this all along this side of the house.
Stainless steel wire clips
5.
Repeat the glazing procedure on the other side of the house.
6.
Following this, glaze the rear end in a similar fashion.
7.
Proceed to the door end and glaze that in the same way as described earlier.
8.
Finally, glaze the door.