Elite Greenhouses WIDE MAXIM, Instructions & Illustrations

Page: 16 / 28

9. Turn the door over and insert the black rubber draught excluders in the groove (bolt slot) in
each unhanded door post. Push up to the top of the door and trim off the surplus at the bottom.
With a pair of pliers squeeze the groove together at the bottom so that the rubber will not slip down
when the door is in its upright position.
10. Do exactly the same with the right hand door remembering that the draught excluder is insert-
ed into the right hand bar i.e. unhanded one.
11. Do not fit the doors to the gable at this stage – wait until the structure is fully assembled prior
to glazing.
12. Having assembled both doors you need to attach a piece of alloy angle to the rear of the right
hand door. The angle is equal in length to the door posts and has 3 holes equally spaced. Insert bolts
into the bolt slot of the left hand upright of the right hand door, attach the angle, put on and tighten
the nuts.
13. The door catch can be fitted once the doors are hung and working properly. You will need to
decide where you want the catch to go and drill 4 holes in the horizontal door panels to accommo-
date the catch as illustrated.