Elite Greenhouses 6'3" WIDE CRAFTSMAN, Instructions & Illustrations

Page: 20 / 28

20
10. Slide the glazing beading into the V groove of the roof glazing bars. They can now be at-
tached to the ridge and gutter. Attach them to the ridge first by sliding a bolt into the bolt slot of the
glazing bar, inserting it through the hole in the flange of the ridge. Put a nut on and tighten up. Do
the same with the rest of the roof bars.
11. Where the roof vent is to be positioned put an extra one bolt per bar i.e. the roof vent covers
two glazing bars so two extra bolts per roof vent.
(Key Point ). One each bar.
12. Before bolting the bottom of the roof bar to the flange of the eave bar, insert final nut and bolt
to the eave bar as illustrated.
If your greenhouse is 10’5” or 12’5” long you have additional Tee Bar cantilever bracing at the
eave, 4 extra cantilevers for 10’5”, 6 extra for 12’5”. Put an extra bolt into the 2
nd
and 3rd glazing
bars (for 10’ model) and also 4
th
(for 12’ model) before attaching the glazing bar to the eave. (Key
Point).
Secure the Tee Bar cantilever to the 2
nd
and 3
rd
bar of the 10’ (4 cantilevers-2 each side) and also
the 4
th
bar 12’ (6 cantilevers – 3 each side).