Elite Greenhouses 6'3" WIDE CRAFTSMAN, Instructions & Illustrations

Page: 6 / 28

6
INSTALLATION INSTRUCTIONS FOR THE 6’3” WIDE MODEL
“CRAFTSMAN RANGE”
THE CONTENTS OF THIS CARTON ARE DIVIDED INTO DIFFERENT FRAME AS-
SEMBLIES THAT COLLECTIVELY MAKE UP THE COMPLETED GREENHOUSE
FRAMEWORK.
It is recommended that each framework assembly is fully completed before moving onto the next.
The contents are as follows:
1. Two side frames
2. Rear end frame
3. Door end frame
4. Roof vent (s)
5. Door
6. Bag of fittings containing:
a. Nuts and bolts general assembly
b. Overlap clips for glass
c. Spring clips for glass
d. Casement stay (1 per vent)
e. Casement stay nuts and bolts
f. Four eave plates (not in the main bag, but taped up with the casement stay separately)
g. Two ridge plates
h. Two door wheels
i. One door guide
j. Small self tapping screws
k. 1 Large self tapping screw
l. 1 Spring washer
m. 1 Door keep
7. Roof bars
8. Glazing beading
9. One length of ridge
10. Two black brush draught excluders
11. Small angle brackets for anchoring down
12. Two door end plates with 3 holes for door end assembly
For clear identification of parts and the number required please carefully refer to the earlier
pages of component drawings and parts list.
N.B. If you are erecting the greenhouse on a soft standing you will need either a flagstone or a
row of bricks under the doorway, level with the top of the soil to give support to the cill when
you stand on the threshold, if you have not ordered a soft base support with your greenhouse.