ve
rs
io
n 1
1/
20
19 E
N
de
si
gn R
ed
ty
pe
3
5
2
7
3
4
6
8
6
TRANSFORM.EU
REC OMME NDE D MOUN T ING IN S T RUC T ION S
TALL FLOWERBED MOUNTING SET ELEMENTS MADE OF THE TRAPLAST™
Universal mounting instructions for tall flowerbed double-chamber! Model size 2400 × 1060 × 800 mm (w × d × h). Regardless of the size/
type of flowerbed purchased, always bring to bear 15 decking boards
1
for 2 face boards and partition, 20 decking boards
2
for 4 sidewalls.
BEST PRACTICE OF MOUNTING TALL FLOWERBED
1
decking board 132 × 32 × 1000 mm*,
15 pieces for 2 faces and partition
2
decking board 132 × 32 × 1200 mm*,
20 pieces for 4 sidewalls
3
decking board 132 × 32 × 1000 mm*
(without spring with groove), 3 pcs
4
decking board 132 × 32 × 1200 mm*
(without spring with groove), 4 pcs
5
joist 50 × 50 × 790 mm, 4 pcs
6
metal support 70 × 70 × 800 mm, 4 pcs
7
screw with recessed head 6 × 70 mm,
white zinc-plated, 96 pcs
8
screw with semi-round head 5 × 25 mm,
white zinc-plated, 72 pcs
We recommend to assemble the Tall Flowerbed made of the
Traplast™ where it will stand taking into account its total weight.
The joist
5
is slightly shorter than the resulting height of the
flowerbed, so decide first whether it will face up with the bottom or
upper edge of the sidewall - see the Figure A. If you have decided
to face up with the upper edge of the sidewall, lay the decking
board on two parallel joists
3
. The upper decking boards
3
and
4
do not have spring and the groove must be at the bottom - see the
Figure E. When facing up the joists and the decking board at the
3
7
5
5
1
1
1
1
1
bottom, start with the decking board
1
while the groove is facing
down again. Align the joists with the sides of the decking board
and drill a 4 mm diameter hole in its longitudinal axis up to the joist
in the distance of 25 mm from each side of the floor. Screw the
decking board using the screws
7
. Gradually assemble, pre-drill
and mount five more decking boards one after the other, see the
Figure E. If you started from the bottom edge with the decking
board
1
, end at the top with the decking board
3
. The first
flowerbed face is finished.
!
When working/assembling, use the protective equipment!
TALL FLOWERBED
DOUBL E-CH A MBE R
* The values given are for the flowerbed version in the size of 2400 × 1060 × 800 mm (width x depth x height). The number of pieces and their length vary according to the chosen size of the flowerbed.
E
3
1
4
2
F
3
4
5
1
2
A
C
B
D
