7
WAVE ROWER MACHINE ASSEMBLY MANUAL
3.FUNCTION OPERATION SPECS
3.1 Fundamental function
Power on the console, full display appears after 2 seconds and the console will “beep” once,
before entering the idle window. Once in the idle window, the user can start exercise directly or
exercise after adjusting the value setting, the function values will start counting during exercise.
If the function value is not set, each value will increase until the upper limit is reached during
exercise; If the function value is set, the set value counts down to 0, and any unset value will
increase until the value limit is reached.
When the set value counts down and reaches 0 during exercise, the console will “beep” 4 times to
confirm your workout target is complete.
2. Auto-power-on & power-off:
Once the user starts exercise or presses any button, the console will power on automatically; if the
user has stopped exercising or not using the console for approximately 4 min, then the console will
power off automatically and enter the sleep mode.
REMINDER:
1. The console requires 2 x AA 1.5V batteries for operation. If the rower is not intended to be
in use for any prolonged length of time or in storage please remove the batteries to avoid any
corrosion damage to the console.
2. Keep the console away from humid environments i.e. Indoor Spa, Sauna or Swimming Pool
areas.
FUNCTION
VALUE/ SPECS
RPM:
0~15~999
TIME
0:00~99:59
Press +/- to adjust
DISTANCE
0.00~99.99 K/M
Press +/- to adjust
CALORIE
0 ~ 9999KCAL
Press +/- to adjust
STROKES
0~9999
TOTAL
0~9999
