15
WAVE ROWER MACHINE ASSEMBLY MANUAL
At least once a year, the cover on your rowing machine should be removed and any dust or debris
vacuumed up to maintain the smooth operation of the drive system. Contact the Elite Fitness
Service Department for further information on servicing your rowing machine.
Prolong the life of your rower by performing periodic maintenance checks. Not only does this
ensure your machine is in full working order to ensure they continue to run smoothly and reliably,
but it will save you service costs in the long run.
Water Treatment
It is recommended that the water in your Wave Rower should be either replaced annually or
a Chlorine/Water Purification Tablet used every 6 months to keep the water treated and clean.
This will prevent the water from appearing cloudy or discoloured.
Cleaning
General cleaning of the unit after use will protect the rowers powder-coated framework and
prevent unnecessary corrosion stains and damage to the structural components from sweat and
perspiration. During this time check for any cracks and damage.
Guide Rail:
This area needs attention every week. It needs to be kept free of dust and debris. If the wheels roll
over dust and debris it ingrains itself in either the wheel or the rail itself. Over time this will pit the
wheels or guide rail making for a bumpy workout.
Chain:
If you have a chain attached to your rowing handle once every 6 months you should give it a light
oiling. The chain should be free of build-up before re-greasing if it is dirty use an automotive
degreaser and paper towel to remove the build-up.
To oil the chain; pull the chain to its full extent and while holding the handle use a clean paper
towel to rub lubricant along the length of the chain. 3 in 1 oil or 20W motor oil are recommended.
About 1 teaspoon of lubricant is plenty.
CARE AND MAINTENANCE
