12
STEP 10 :
Put the hand pulse wire with handlebar (3) through the hole of the front post (2) to top of front
post.
Put the handlebar (3)with the foam grip (22) and hand pulse (56) to the front post bracket and
fasten with “T” knob (52), champ cover (91), flat washer (92) and bushing (90).
ASSEMBLY INSTRUCTIONS
STEP 11:
Remove the pre-assembled 4 Allen head bolts (82) from the meter (18).
Connect the middle section sensor wire (58) of the front post with meter (18) securely. Connect
the pulse wire (60) with meter (18).
Fix the meter (18) with the top of front post (2) and fasten with bolts (82).
CONGRATULATIONS
Assembly of your
Elite V05 Recumbent Exercycle
is now complete! Be sure to fully inspect your
machine before using it for the first time.
WARNING:
Failure to visually check and test the assembly of your exercycle before use can cause
damage to the exercycle and injury.
