11
10
ELITE VO2 EXERCYCLE ASSEMBLY MANUAL
STEP 7:
Attach the seat post (6) into the slide bracket (7) and secure with 4 carriage bolts (76).
ASSEMBLY INSTRUCTIONS
STEP 9:
ATTACH THE FRONT POST
Remove the pre-assembled 6 Allen head bolts (77), 2 curve washers (66) and flat washers (65)
from the main frame (1).
Connect the middle section sensor wire (58) of the front post with the lower section sensor wire
(89) securely.
Put the front post (2) and front cover (35) into the bottom post of main frame (1) and fasten with 6
Allen head bolts (77), 4 flat washers (65) and 2 curved washers (66).
NOTE: do not tighten Allen head bolts (77) too much at the beginning. When all parts are fixed
already, and then fasten each one piece tightly.
ASSEMBLY INSTRUCTIONS
STEP 8:
Remove the pre-assembled 4 Allen head bolts (77) and 4 flat washers (65) from seat (19).
Fix the seat (19) with the back seat tube (6) and fasten with 4 bolts (77) and 4 flat washers
(65). Fix the backrest (19) with the back seat tube (6) and fasten with knobs(53).
Connect the tension cable (59) and tension (57). Fasten tension into post tube (2) with bolt (70)
and flat washers (71).
