9
8
ELITE VO2 EXERCYCLE ASSEMBLY MANUAL
STEP 3:
Assemble each pedal (20R&20L) to the crank. Pedal ”R” assemble with crank right side , Pedal ”L”
assemble with crank left side : See the mark “R” & “L”(right and left) on the pedals (20R&20L) and
crank .
NOTE: The right pedal “R” should be threaded on clockwise. The left pedal “L” should be threaded
on counter-clockwise.
Attach the pedal straps to the pedals (20R&20L).
NOTE: Adjust the pedal straps to meet your foot/shoes size by 4 adjustable holes.
ASSEMBLY INSTRUCTIONS
STEP 5:
Place the upper rear cover (33&34) into the rear main frame (9) and slide tube (11), fasten with 5
screws (88).
Place the lower rear cover (31&32) into the rear main frame (9) and fasten with 5 screws (88).
Place the rear cover (29&30) into the main frame (1) and slide tube (11), fasten with 6 screws (88).
ASSEMBLY INSTRUCTIONS
STEP 4:
Put the slide tube with slide bracket (7) into the main frame (1) and rear main frame (9), fasten
with 4 flat washers (65) and 4 carriage bolts (76).
Remove the pre-assembled 2 Allen head bolts (76) from slide bracket (7). Put the adjustable bar
(15) to the side of the slide bracket (7) and fasten with head bolts (76)
STEP 6:
Remove the pre-assembled 4 carriage bolts (77) and 4 flat washers (65) from slide bracket (7).
Put the right handlebar (4) with grip (23) to the side of the slide bracket (7) and fasten with
carriage bolts (77), flat washers (65).
Put the left handlebar (5) with grip (23) to the side of the slide bracket (7) and fasten with carriage
bolts (77), flat washers (65).
