RESIDENT USE
4
PAGE
USING KEYCODES AND UTILITY CODES
(ACTIVE ENTRY 1 ONLY)
SCREEN SAVER MODE
* ACCESS GRANTED *
Please Enter
(fig a.)
* ACCESS GRANTED *
Please Enter
(fig c.)
PRESS ANY KEY
(fig e.)
* INVALID ENTRY *
Invalid 6-Digit Code
(fig b.)
* ACCESS DENIED *
Not In Access Period
(fig d.)
Residents are assigned a 6-digit, personalized key-
code for accessing the facility. To use the keycode
assigned, the resident must first push the
key once and enter their keycode. The screen will
display “Access Granted” (fig a.) and access will be
allowed. If an incorrect keycode is entered, the sys-
tem will inform the user of the invalid entry (fig b.)
The resident can then re-enter their keycode.
RESIDENT 6-DIGIT KEYCODES
All systems, no matter what the memory capacity,
are equipped with 60 different Utility codes. To
access the facility within the time zone set, the
Utility Company must first press the key
TWICE and then enter their 4-digit code. If it is
within the programmed time zone for entry, the
screen will display “Access Granted” (fig c.) and
access will be allowed. If, however, it is not within
the time zone for entry, the display will inform the
user and access will not be allowed (fig d.)
If the Dial Code System is inactive for 15 seconds it
will go into sleep mode. The screen will continue to
display the scrolling message “Press Any Key”
until a key is pressed. The Screen saver mode is not
available while in program mode.
INDIVIDUAL UTILITY CODES
EXAMPLE - UTILITY CODE 8716 =
8
7
1
6
EXAMPLE - KEYCODE 002543 =
0
0
2
5
4
3
