11
PAGE
Speaker T
erminal 1
Speaker T
erminal 1
VCR Relay N O (green)
VCR
Relay COM (green)
Gate Relay N O (yellow)
Gate Relay COM (yellow)
Door Relay N O (blue)
Door Relay COM (blue)
Heater (red)
12V
AC T
ransformer / Heater (white)
12V
AC T
ransformer (black)
Microphone (+)
Microphone (-)
INPUT/OUTPUT PORT CONNECTOR
15 Pin
Input / Output
Connector
USOC RJ11C
Telephone Line
(included)
OPTIONAL
9-Pin Communication port
connection - for optional
RF and RS-485 products
OPTIONAL
Parallel Printer Port
connection see page 28
Entry Phone Processor
1
1
2
2
3
3
4
4
5
5
6
6
7
8
7
8
SPEAKER TERMINAL: Pre-installed speaker output.
VCR RELAY: For use with Time Lapse VCR. Each time
access is granted, the VCR Relay is activated for 5
seconds, allowing recording of all access to facility.
HEATER: For use with the white wire to allow
optional heater kit to be connected. Relay goes on at
0°f and off at 20°f.
GATE RELAY: for use with gate operator to
control access through main vehicular gate.
DOOR RELAY: For allowing access through pedestri-
an gate or door.
12 VAC: Power supply to the Entry Phone.
MICROPHONE: Pre-installed microphone input.
TELEPHONE LINE: Standard USOC RJ11C phone line
(included) to be connected to standard phone jack.
Telephone line used for phone entry system must
be a dedicated line.
NOTE:
