48
English
• Perform maintenance after 200 hours (§ 11.2.2.D).
• Change the hydraulic oil and oil fi lter (§ 11.5.8).
• Replace the gas spring (§ 11.5.9).
• Replace the elastic coupling of the hydropump (§ 11.5.10).
11.3 Cleaning the machine
11.3.1 The importance of cleaning
ELIET recommends cleaning the machine every time that it has been used.
Regard every cleaning instance as an inspection where the good condition of the components
and the machine is checked. You can, thus, intervene on time to prevent faults and failures. This
will ensure that the service life of your machine is improved.
Not cleaning the machine will lead to:
• Premature wear of the bearings, gaskets and drive belts
• Increased risk of fi re
• Decreased cooling effi ciency of the engine
• Reduced performance
• A detrimental effect on the paint coating and the safety stickers
• Not noticing breaks or wear at an early stage
Note :
The warranty will not apply should daily cleaning be ignored.
Warning:
If the machine does not operate optimally,
this can compromise the safety
of the user.
Warning:
Wood residue, chippings and fi ne dust can accumulate under the guards and
cause a fi re due to being heated. Avoid similar deposits in the vicinity of
electrical components, batteries, the engine and the exhaust. Clean the
machine thoroughly on a daily basis.
Caution:
Wear suitable clothing when cleaning. Gloves are required.