English
53
• Remove the collection reservoir.
• Now poor xx litres of fresh hydrostatic oil into the tank. ELIET recommends high quality
oil.
• Close the reservoir.
• Start the engine and move the machine a few metres.
• Check the oil level once again and top up if necessary.
Warning:
• Oil shortages in the hydrostatic pump inevitably cause severe damage. (This
type of defect is not covered under warranty).
• Respect the environment: take the oil to an authorised collection point for
expert processing or recycling. Never pour oil down the drain.
11.4.3 Machine maintenance
11.4.3.1
Visual inspection
It is essential before commencing the work that the machine undergoes an inspection.
This will allow you to anticipate breakage or wear and tear that affects the life span of the
machines.
• Check whether the machine operates at the proper rotational speed at full throttle (3,200
RPM)
• Try not to change the standard settings for the engine.
• Check that no parts have been deformed, that welded seams are not cracked and that
parts are not excessively loose.
• If problems are found, carry out the necessary repairs or maintenance first.
Consult your authorised ELIET service centre for assistance if necessary or to obtain re-
placement parts. Find an ELIET service centre nearest you at www.eliet.eu.
