1
2
3
English
46
11.2.3 Dismantling safeguards on the side of the machine
• The upper casing must first be raised before
removing the side covers.
• The bolt connectors on the side of each protec
-
tive cover can then be removed.
• Tilt the cover slightly towards you and remove the
cover from the machine frame.
• Follow the same steps in reverse order to close
the cover. The recesses in the underside of the
cover must be fitted over the pins on the frame.
11.3
Cleaning the machine
11.3.1
The importance of cleaning
ELIET recommends cleaning the machine after each use. We recommend performing an
inspection each time you clean the machine to check component and machine integrity. It
allows timely intervention and prevention of any defects, ensuring a longer service life of
your machine.
Not cleaning the machine will lead to:
•
Increased wear
•
Increased risk of fire
•
Reduced performance
•
Illegibility of safety stickers
•
Not noticing defects or wear at an early stage
Caution:
Failure to perform the daily [sic] cleanup will result in loss of warranty.
