Installation and First Start-Up
- 15 -
8.3
Adjustment of Reading Distance and Lateral Offset
Depending on the order specification, a 10 mm or 20 mm wide single-track coding or a complete all-round
coding is used. Since the magnetic field lines are differently pronounced with a narrower and wider coding,
different maximum reading distances and lateral offset tolerances result for the mounting of the sensor to the
round rod.
8.3.1
Mounting Tolerances
Table 1: Mounting tolerances
Coding
Order index Reading distance
Lateral offset
Pitch & Roll Angle
Yaw Angle
10 mm
1
(
max. 1 mm
max. ± 1.0 mm
see figure 7
<±1.0°
20 mm
2
(
max. 1.5 mm
max. ± 2.0 mm
see figure 7
<±1.0°
All-round
3
(
max. 1.5 mm
max. ± 2.0 mm
see figure 7
<±1.0°
Figure 6: Adjustment of reading distance and lateral offset
Figure 7: Angular tolerances
REMARK
Any mechanical loads that may occur must be taken into account when adjusting the
reading distance.
Side cover
Round rod
Cylinder
Mounting ring
Maximum
reading distance
5 mm
Sensor housing
Coding
Lateral offset
Center of the sensor pitch line
Roll: Pitch: Yaw:
max. 1.0 mm
resp. 1.5 mm
<±1.0 °
max. 1.0 mm
resp. 1.5 mm
