PURELAB Ultra Mk2
Operator Manual
ELGA
Page 30
PURELAB Ultra Mk 2 Version 3 11/08
6.6 Water Supply Flush
The system has been designed to accept a variety of pretreated water
supplies and the Water Supply Flush is tailored to ensure that each
type of supply does not have unacceptable levels of impurities.
CAUTION!
If the ‘Feed Type’ is not correctly set the
performance of the unit may be severely
affected. See Section 5.4 Step 13 - Feed
Water Type.
The remaining duration of Water Supply Flush is displayed on the
screen. For the Bioscience and Genetic models this will be followed
immediately by a flush of the UF.
All versions of the
PURELAB Ultra
will flush on initial power up and
every 6 hours thereafter.
Prior to the end of ‘Night Service’ the unit will perform an extended
flush. If the ‘Night Service’ mode is not initiated then the unit will
perform the extended flush at 7am.
All flush cycles can be interrupted and normal operation resumed by
pressing the process button.
Water Supply Flush Screen
Summary of Contents for PURELAB Ultra Mk 2 Scientific
Page 4: ......
