PURELAB flex 1/2 – US Operators Manual
ELGA
Page 2
PURELAB flex 1/2 - US MANU40562 Version 02 - 10/15
1.
INTRODUCTION
1.1
Health & Safety
Please ensure you have read the Health & Safety notes in Section 7 before commencing.
1.2
Product Range
This Operators Manual has been prepared for the following PURELAB flex product
models:
PURELAB flex (Optional Purification Pack)
PURELAB flex (Purification Pack + UV + TOC)
1.3
Use of this Manual
This manual guides you through the basic operation of the PURELAB flex allowing you to
obtain a guaranteed supply of purified water to meet your requirements.
1.4
Installation
The PURELAB flex is supplied with a Quick Start Guide and Quick Reference Guide.
The Quick Start Guide shows you how to install and commission the PURELAB flex.
The Quick Reference Guide shows you how to perform day to day functions in order to
get the most from your PURELAB flex without having to refer to the Operators Manual.
1.5
Environment
The PURELAB flex unit should be installed on a flat, level surface, in a clean, dry
environment. The unit can also be wall mounted against a vertical wall capable of
supporting the weight for this we recommend the use of the wall mounting kit.
1.6
Commissioning
The PURELAB flex is supplied in a preset commissioning mode which has to be completed
before purified water can be dispensed.
1.7
Customer Support
If you need help with your PURELAB flex, please call your local ELGA representative. For
the address of the nearest ELGA LabWater Sales and Service office visit the country list
on our website.
Summary of Contents for PURELAB flex 1 & 2 - US
Page 1: ...PURELAB flex 1 2 US Operator Manual ...
Page 2: ......
