02/02/22
User Manual CPS/M 62000584_05
19
2.5
CONTINUOUS AND INRUSH MODE
Through the current key you can select the Continuous (Amp) or inrush (Amp%) configurations, it
changes the limit of peak and RMS current. The change is available of until the machine is running
2.6
FREQUENCY MENU
2.6.1
Frequency setting
The output frequency of CPS can be 50 or 60 hertz, the FREQUENCY display shows the set-up value
and FREQUENCY button switch the set up value.
In this case after pushing the button FREQUENCY the frequency display flashes until the output
frequency coincides with the set one.
It is possible to set the frequency between 40-80Hz only via remote control.
2.6.2
Frequency reference setting
The output frequency can have two references: the first one is a inner frequency reference with a
precision of 0.01%, the second one is the line of loading frequency.
At turn on CPS is connected to the inner reference; you can change the reference to line only with
PC remote interface.
Summary of Contents for 99112103
Page 29: ...02 02 22 User Manual CPS M 62000584_05 29 3 4 WIRING DIAGRAM 3 4 1 2 WIRE CONFIGURATION ...
Page 30: ...02 02 22 User Manual CPS M 62000584_05 30 3 4 2 4 WIRE CONFIGURATION ...
Page 63: ...02 02 22 User Manual CPS M 62000584_05 28 4 5 SCHEMI DI CABLAGGIO 4 5 1 CONFIGURAZIONE 2 WIRE ...
Page 64: ...02 02 22 User Manual CPS M 62000584_05 29 4 5 2 CONFIGURAZIONE 4 WIRE ...
