LanConn-400 User’s Guide
3
5. Etm Manager Program
Etm.exe is a device manager program which runs under the Windows 32 bit environment. Using
UDP broadcast packets, Etm.exe allows you to inquire and modify LanConn-400’s basic parameters.
Upon executing Etm.exe, the following screen (example) will appear if a LanConn-400 is found.
The screen shows number of devices detected, as well as their IP Address, Subnet Mask, MAC
Address and Device ID. If you select the [View] / [Refresh] function (or press the F5 key), the system
will re-detect the devices and update the screen accordingly. Because Etm.exe uses UDP
Broadcast Packets, it has the following characteristics:
It’s not subject to the subnet restriction – the program is usable even if LanConn-400’s IP and
the PC’s IP are not on the same subnet.
Since broadcast packets cannot pass through the router, only the devices on the same network
section can be detected.
Due to the fact that Etm.exe uses UDP broadcast, for security reasons the Config function is
available when only one LanConn-400 device is detected. In this case, the following parameters can
be modified under the Config function.