LanConn-400 User’s Guide
5
6. Browser Configuration
LanConn-400 supports the HTTP communication protocol. All device configurations can be easily
set in the browser program. Just type in the LanConn-400’s IP address, and the following screen will
be displayed.
The following basic information is shown in the display.
•
System time elapsed:
The elapsed time since the system was turned on. In the screen
shown above, the elapsed time is 0 hour 0 minute and 9 seconds. This information can be used to
determine if the device has been operating normally without being reset
.
•
Firmware release date:
This is used to identity the firmware version of the LanConn-400
device.
•
Ethernet address:
The Ethernet address has 6 hex-decimal bytes
.
Now, type in the password and click the [Login] button to enter the configuration screen. Note that
initially the password is not required, just click the [Login] button.
