17
Installation
EN
If designed with a pivot pin (optional) or with threaded holes (optional) the fas-
tening on the housing side is replaced.
4.2
Electrical connection
WARNING
Danger of life-threatening injury due to faulty electrical connection.
Electric shock possible.
•
Check the proper connection of the PE conductor prior to initial start of ope-
ration.
CAUTION
Damage to the device due to faulty electrical connection.
•
Take note that the motor and control unit have different supply voltages.
CAUTION
Damage to the device due to mishandling.
•
Operation must not take place without integration into and evaluation of the
limit switches in the control unit.
CAUTION
Damage to the device due to faulty electrical connection.
• Always connect the monitor cable to a right-hand rotary field.
CAUTION
Damage to the device due to the use of a non-fitting or unsuitable drive control
unit.
•
The control unit must support all the options attached to the device.
•
Connect all the marked cable conductors.
•
Do not connect any conductors that are not marked.
No circuit diagrams are listed below on account of the multitude of configuration
possibilities.
The device has to be connected in accordance with the circuit diagram enclosed
with the delivery.
Please refer to the following pages or the circuit diagram enclosed with the
delivery for connection of the option selected by you.
