elero Unio-868, Operating Instructions Manual, Page: 9 / 11

16 | DE Ⓒ elero GmbH
Ⓒ
elero GmbH DE | 17
Weight [g] 160
Protection type (IP code) IP20
5 Notes on the EC declaration of
conformity
elero GmbH hereby declares that the Unio-868 complies
with the basic prerequisites and the other relevant provi-
sions of the EC directives. The complete declaration of con-
formity can be found in the download area of our website.
6 Troubleshooting
Fault Cause Remedy
No
radio reception
1. Transmitter is not
programmed
2. No mains voltage
1. Programming the
transmitter
2. Switch on the
mains voltage
Bad
radio reception
1. Detrimental posi-
tion of the Unio-
868
2. Distance between
transmitter and
Unio-868 too high.
3. HF-fault sources
overlie the radio
signal.
1. Change the posi-
tion of the Unio-
868.
2. Reduce the dis-
tance between
the transmitter
and the Unio-868
or remove obsta-
cles between the
transmitter and
Unio-868.
3. Switch off or
remove fault
sources.
Fault Cause Remedy
The connected
consumer is not
supplied with
power
1. No mains power
supply to the Unio-
868
2. Transmitter is not
programmed.
3. Switching condition
of the Unio-868
does not corre-
spond to the user's
expectations.
1. Switch on the
mains voltage.
2. Set transmitter.
3. Check the switch-
ing condition of
the Unio-868 by
the indicator lamp.
Correct the assign-
ment of the UP or
DOWN button if
necessary.
7 Repair
If you have any questions, please refer to your specialised
company.
Please always state the following information:
‰
Item number and item designation on the nameplate
‰
Error type
‰
Previous and unusual events
‰
Surrounding circumstances
‰
Own assumption
8 Manufacturer's address
elero GmbH
Antriebstechnik
Linsenhofer Str. 65
72660 Beuren
Deutschland / Germany
Phone:
+49 7025 13-01
Fax: +49 7025 13-212