12 | DE
Ⓒ
elero GmbH
Ⓒ
elero GmbH
DE | 13
3.7.3 Operation by hand-held transmitter
STOP
button (■)
OFF
(fixed)
UP
button (▲)
ON
or
OFF
,
depending on teaching direction
DOWN
button (▼)
OFF
or
ON
,
depending on teaching direction
3.7.4 Operation by automatic devices
(clocks and/or sensors)
• Up to 16 transmitters (sensors, hand-held transmitters)
can be taught in to the Unio-868. Permitted sensors (the
radio version 868 MHz of each) are: Lumo, Lumero,
Sensero and Aero. The Sensero and Aero only evaluate
the light telegrams.
• The last command received is executed.
• An automatic switching function that is overwritten by
the hand-held transmitter is executed according to the
SmartStart/semi-automatic rules. SmartStart/semi-
automatic causes condition changes of the Unio-868 to
be performed only when the condition of the transmitting
sensors has changed first. This is needed to change a
switching condition that was determined by cyclic trans-
mission from a sensor and to keep it stable.
• If the automatic function is switched off, the Unio-868
will only react to the operation button and the hand-held
transmitters anymore. The Unio-868 will then not react to
sensor and timer commands, except for prioritised alarm
and clock commands.
• The Unio-868 controls the twilight function of the trig-
gered sensors. When using the twilight function of the
Lumo, a manual switching command or a clock switching
command is to be used to revoke the twilight switching
condition.
• Double commands (double
UP
or double
DOWN
) are
treated like "single" running commands (
UP
or
DOWN
).
This means that the Unio-868 is generally not suitable
for ventilation and interim position running strategies.
Switching times never limit themselves independently.
Automatic
STOP
commands are ignored.
• Switching from manual mode to automatic mode resets
all sensor functions.
• Central channel switching commands are ignored.
3.8 Teaching in (programming)
The purpose of teaching in is programming one or several
transmitters for the Unio-868.
By teaching in the first transmitter, the radio operating mode
of the Unio-868 is specified for the
elero
ProLine mode or
elero
ProLine 2 mode - according to the transmitter to be
taught in.
• Mixed operation of ProLine 1 transmitters and
ProLine 2 transmitters is not possible.
Connect the Unio-868 to a mains outlet.
The Unio-868 is in
teaching mode
for 5 minutes.
Teaching mode is signalled by one flash of the LED:
When the Unio-868 receives the radio signal from a
pushed programming button P (or teaching button P)
during these 5 minutes, the Unio-868 is put in
learning
mode
for 2 minutes.
Learning mode is signalled by the flashing LED.
•
Fast flashing (approx. 10 Hz) =
ON
•
Slow flashing (approx. 2 Hz) =
OFF
In learning mode, the Unio-868 switches its switching condi-
tion (
OFF
/
ON
) every 3 seconds. Between the switching
conditions, there is a break of one second each. The learn-
ing sequence is started with the switching condition
ON
.
Summary of Contents for Unio-868
Page 11: ...20 DE elero GmbH...