elero Unio-868 Operating Instructions Manual Download Page 3

4 | DE  

 elero GmbH

 

 

 elero GmbH

 

DE | 5 

General information 

1.1  Notes on the Operating Instructions 

Please read these Operating Instructions of the Unio 868 

carefully prior to the first commissioning and observe the 

safety instructions! All activities on and with the Unio-868 

may only be performed as they are explained in these 

Operating Instructions. Please store this document for later 

use. If you pass the Unio-868 on to someone else, please 

give them these Operating Instructions as well. 
Warning symbols and signal words used in these Instruc-

tions. 

Warning symbols and signal words used 

Warning!

 

Warning of danger by electric shock! 

Caution!

 

Observe instructions to prevent injuries and 

material damage! 

Important:

 

Observe instructions!  

Important:

 

Further information on the use of the Unio-868! 

Disposal note:

 

Electronic parts to be disposed of separately 

from the household waste. 

The manufacturer reserves the right to make changes to the 

Specifications stated in these Operating Instructions at any 

time. These may, in individual cases, be different from the 

respective device version, however the functional informa-

tion will not undergo significant changes or become invalid. 

The current version of the Specifications may be requested 

from the manufacturer at any time. No claims may be as-

serted against the manufacturer as a result of the preceding 

sentence. Deviations from text or picture statements are 

possible and depend on the technical development, fea-

tures, and accessories of the device. Deviating information 

on special versions will be explained by the manufacturer 

in the sales documentation. Other information shall remain 

unaffected by these provisions. 

1.2  Standards and Directives 

During the design process, the basic health and safety re-

quirements of the applicable laws, Standards and Directives 

were complied with. All safety information in these Operat-

ing Instructions refer to the laws and regulations currently 

applicable in Germany. All instructions in the Operating 

Instructions shall be observed without limitation and at any 

time. Beside the safety instructions contained in these Op-

erating Instructions, the provisions for accident prevention, 

environmental protection and occupational safety, which are 

applicable for the operating site, must be observed. Provi-

sions and Standards for the safety rating can be found in 

the EC Declaration of Conformity which also confirms the 

safety herein. 

1.3  Intended use 

The Unio-868 is a radio switching outlet that permits the 

comfortable wireless switching of electric mains-powered 

devices across large distances. The device designation 

Unio-868 contains the version based on 915 MHz as well. 

Summary of Contents for Unio-868












Reviews: