8 | EN
©
elero
GmbH
Programming the transmitter | Travel profiles | Troubleshooting | Disassembly and disposal
The device is made of materials that can be reused if dis-
mantled by a specialist company. Please note the local
regulations on disposal of packaging materials and old
appliances.
On disassembly, additional dangers must be reckoned with,
which do not occur during operation.
Before disassembling the drive the system is to be mechan-
ically secured. The drive must not be forcibly disconnected
from the system.
WARNING
Risk of injury due to electric current.
Risk of electric shock.
►
Separate power supply cables physically and discharge
any energy accumulators still charged. After switching off
the device, wait at least 5 minutes so that the motor can
cool down and the voltage can be discharged from the
capacitors.
►
During disassembly work above head height, use suit-
able, inspected and structurally stable climbing aids.
►
Work on the electrics may only be performed by person-
nel described in the section “Safety notes on electrical
installation”.
Removal for scrap
The international, national and regional laws and regula-
tions prevailing at the time of scrapping the product must be
observed.
Ensure that materials and components are recycled, dis-
mantled and separated properly in addition to observing the
environmental and health hazards relating to recycling and
disposal.
CAUTION
Environmental damage in case of incorrect disposal
►
Electrical scrap and electronic components must be
handled as special waste and may only be disposed of by
approved specialist companies.
►
Groups of materials such as various types of plastics and
metals must be separated before recycling/disposal.
Disposal of electrical and electronic components
The disposal and recycling of electrical and electronic com-
ponents must be carried out in accordance with the relevant
laws and national regulations.
13 Comments on EU Declaration of
Conformity
elero
GmbH hereby declares that the RolMotion/D+
M-868 tubular drive is in compliance with all applicable
regulations of Machinery Directive 2006/42/EC and the
Directive 2014/53/EU. The full text of the EU Declaration of
Conformity is available at the following Internet address:
www.elero.com/downloads-service/
14 Technical data and dimensions
The technical data specified is subject to tolerance factors
(according to applicable standards) and refer to an ambient
temperature of 20 °C.
