Variant B: Initial position at limit stop, end position
freely adjustable
②
Press the [
DOWN/CLOSE ▼
] button until the drive
stops automatically.
The initial position is set.
Optional:
Activate the release function for the initial
position: See chapter 5.6.2
③
Press the [
DOWN/CLOSE ▼
] button again until the
slats have reached the desired end position.
The drive begins to travel, briefly stops and travels
further (for as long as the button remains pressed).
You can make corrections using the [UP
▲
] and
[DOWN/CLOSE
▼
] buttons.
④
Press the [
UP ▲
] button until the drive stops auto-
matically.
Adjustment of the variant B end positions is complete.
Fig. 8 End positions variant B:
5.6.8 Variant C: Initial position and end position at
limit stop
Variant C: Initial position and end position at limit
stop
①
Starting from a central slat position, press the
[
UP ▲
] button with the assembly cable until the
slats have reached the desired initial position (travel
to limit stop).
The drive begins to travel, briefly stops, and then
travels further (for as long as the [UP
▲
] button
remains pressed).
The drive switches off automatically when it reaches
the initial position.
②
Press the [
DOWN/CLOSE ▼
] button until the drive
stops automatically.
The initial position is set.
Optional:
Activate the release function for the initial
position: See chapter 5.6.2
③
Press the [
DOWN/CLOSE ▼
] button again until the
slats have reached the desired end position (travel
to limit stop).
The drive begins to travel, briefly stops, and
then travels further (for as long as the [DOWN/
CLOSE
▼
] button remains pressed).
The drive switches off automatically when it reaches
the end position.
④
Press the [
UP ▲
]button until the drive stops auto-
matically.
The end position is set.
Optional:
Activate the release function for the end
position: See chapter 5.6.3
Adjustment of the variant C end positions is complete.
Fig. 9 End positions variant C:
6 | EN
©
elero
GmbH
Setting the end positions and release
5.6.5 Four end position variants
Four different end position settings are possible. These
can be selected as appropriate, according to the technical
requirements of the slats.
End positions (4 variants)
A
Initial position and end position freely adjustable
B
Initial position at limit stop, end position freely ad-
justable
C
Initial position and end position at limit stop
D
Initial position at limit stop, end position freely ad-
justable
Fig. 6 Variants of the end positions for the InDrive M
5.6.6 Variant A: Initial position and end position
freely adjustable
Variant A:
Initial position and end position freely adjustable
①
Starting from a central slat position, press the
[
UP▲
] button with the assembly cable until the slats
have reached the desired initial position.
The drive begins to travel, briefly stops, and then
travels further (for as long as the [UP
▲
] button
remains pressed).
You can make corrections using the [UP
▲
] and
[DOWN/CLOSE
▼
] buttons.
②
Press the [
DOWN/CLOSE ▼
] button until the drive
stops automatically.
The initial position is set.
③
Press the [
DOWN/CLOSE▼
]button again until the
slats have reached the desired end position.
The drive begins to travel, briefly stops, and
then travels further (for as long as the [
DOWN/
CLOSE ▼
] button remains pressed).
You can make corrections using the [UP
▲
] and
[DOWN/CLOSE
▼
] buttons.
④
Press the [
UP ▲
] button until the drive stops auto-
matically.
The end position is set.
Adjustment of the variant A end positions is complete.
Fig. 7 End positions variant A:
5.6.7 Variant B: Initial position at limit stop, end
position freely adjustable
Variant B: Initial position at limit stop, end position
freely adjustable
①
Starting from a central slat position, press the [
UP
▲
] button with the assembly cable until the slats
have reached the desired initial position (travel to
upper limit stop).
The drive begins to travel, briefly stops, and then
travels further (for as long as the [UP
▲
] button
remains pressed).
The drive switches off automatically when it reaches
the initial position.
