User Manual / NDA 100/3 TH(S) RG L30 230AC(PoE) LAN
11
Sensor No. 1 IP address
Valid for Ethernet LAN type external sensors only.
Enter corresponding sensor IP address.
This sensor’s IP address will be paired with display’s IP
address. Measured values from the sensor with this IP
address will be displayed on the large size display.
(Display’s IP address is in the URL field of the browser.)
If external RS485 sensor is used, IP address is not used.
Sensor No. 1 TCP/IP port
Valid for Ethernet LAN type external sensors only.
Enter corresponding sensor port number.
Default port number is 10001.
If external RS485 sensor is used, IP Port is not used.
Sensor No. 1 ID
1 - 255
Enter sensor RS485 bus ID number.
Sensor No. 2 settings
Sensor No.2 connect
RS485 / Ethernet / None
.
Select what type of sensor should be paired with display.
RS485
– external sensor is attached to display via cable.
Ethernet
– LAN type sensor is paired with display.
Sensor No. 2 IP address
Valid for Ethernet LAN type external sensors only.
Enter corresponding sensor IP address.
This sensor’s IP address will be paired with display’s IP
address. Measured values from the sensor with this IP
address will be displayed on the large size display.
(Display’s IP address is in the URL field of the browser.)
If external RS485 sensor is used, IP address is not used.
Sensor No. 2 TCP/IP port
Valid for Ethernet LAN type external sensors only.
Enter corresponding sensor port number.
Default port number is 10001.
If external RS485 sensor is used, IP Port is not used.
Sensor No. 2 ID
1 - 255
Enter sensor RS485 bus ID number.
Summary of Contents for NDA 100/3-2 TH RG L30 230AC PoE LAN
Page 1: ......
Page 9: ...User Manual NDA 100 3 TH S RG L30 230AC PoE LAN 9...
