INSTALLATION GUIDE
|
DIM-TO-WARM LED TAPE LIGHT
|
IG090519-1.0
|
3 OF 5
INSTALLATION GUIDE
CELESTE DIM-TO-WARM LINEAR LIGHTING
Prior to mounting, attach to Class 2 magnetic LED Driver, turn on
power and test connection to ensure system is operating properly.
Turn off power again before mounting.
a
b
+
-
+ 24V
-
+
-
Clean surface before mounting.
MOUNT TAPE LIGHT
TURN POWER ON AT CIRCUIT BREAKER
SYSTEM WORKING IMPROPERLY?
Turn power OFF at circuit breaker and verify all connections.
Review SYSTEM DIAGRAMS and TROUBLESHOOTING or
call our Technical Support line at 877.817.6028.
Peel off 3M
™
Adhesive Backing.
Ensure ambient
temp is minimum 50 ° F (10 ° C) or tape will not
adhere properly.
Tear off backing along connector edge.
Adhere to a smooth, dry surface, working one end to
the other, being gentle with the LED’s.
INSTALLATION (CONT.)
8.1
8.2
7
TEST CONNECTION
8
9
