Elem Garden Technic TDE40V37-LI2BF, Translation Of The Original Instructions

Page: 46 / 58

flawless mowing result, the lines should always
overlap by a few centimetres.
• Adjust the cutting height so that the device is not
overloaded. If this not done, the motor may become
damaged.
• Always move across slopes crosswise.
Take special care when going backwards and
pulling the device.
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.
CLEANING/MAINTENANCE
Have any work that is not
described in these operating
instructions performed by an
authorised customer service
centre. Only use original
parts.
Wear gloves when handling
the blade.
Switch off the apparatus,
remove the ignition key (10)
and wait for the blades to
come to a standstill.
General cleaning and maintenance work
Never spray down the device
with water. There is a risk of
electric shock.
• Always keep the device clean. Use a brush or
cloth for cleaning, but do not use any cleaning
agents or solvents.
• After mowing, remove any plant remains that
have become stuck to the wheels, ventilation
opening, ejector opening and blade area using a
piece of wood or plastic. Do not use any hard or
sharp objects as these could damage the device.
• Check the device before each use for obvious
defects such as loose, worn or damaged parts.
Ensure that all nuts, bolts and screws are firmly in
place.
• Check the covers and protective devices for
damage and correct fit. Replace these if necessary.
Replacing blades
If the blade is blunt, it can be re-sharpened by a
specialist company. If the blade is damaged or
unbalanced, it must be replaced.
1. Turn the machine over.
2. Use firm gloves and keep hold of the blade (20).
Use a spanner to turn the blade bolt (21) counter-
clockwise from the motor spindle (22).
3. Reassemble the new blade (20) in reverse
order. Make sure that the blade
(20) is positioned correctly and that the blade bolt
(21) is tightened.
Storage
Release the tightening levers (2+5) and fold the
upper bar (1) and the lower bar (3) together so that
the device takes up less space. Make sure not to
pinch the machine cables while doing this.
• Store the device in a dry place out of reach of
children.
• Give the motor time to cool off before you store
the device in an enclosed space.
• Remove the rechargeable battery before storing
the device for a long period of time.
We are not liable for damage cause by our devices
if this is caused by improper repair, the use of non-
original parts or incorrect use.
Battery storage
_ Store your batteries in a cool area. Optimal
temperature for storing your Li-ion battery for longer
term is 2°C. (capacity loss wil l only be 6% / year
(compared to 20% at 25°C)). Never store batteries
in discharged condition.
_ It is better for Li-ion batteries to recharge them
frequently. Optimal long time storage charge for
your Li-ion battery is at 40% of their capacity.
TECHNICAL DATA
Article number
TDE40V37-LI2BF
Blade width 370mm
Blade SF8A110
Height of cut 25-35-45-55-65-75mm
Grass box capacity
35 L
Battery SF8M12503 40V (2x20V) 2000 mAh
Charging period 1 h
Charger SF8M222-07 110-240V~50/60Hz
Charging current 45W
Charger output DC21V 1800mA
Allowable charging
temperature range
0 – 50°C
Working autonomy 25min/Max
Speed 2900 Min
-1
Battery-type and data
Li-ion
Weight without battery 12.5 Kg