Elem Garden Technic TDE40V37-LI2BF, Translation Of The Original Instructions

Page: 45 / 58

Setting the cutting height (F)
The apparatus has 6 positions for adjusting
the cutting height:
25 mm/35 mm - low cutting height
45 mm/55 mm - medium cutting height
65 mm/75 mm - large cutting height
1. Hold the carrying handle (6) and lift the device
or push the device down.
2. Grip the lever (7) for adjusting the cutting height
and move it past the ratchet mechanism to the
desired cutting height.
The correct cutting height is between 25 and 45 mm
for an ornamental lawn and about 45 - 65 mm for a
utility lawn.
A high cutting height should
be selected for the first
mowing of the season.
Inserting/removing the rechargeable battery (I)
Switch off the apparatus,
remove the ignition key (10)
and wait for the blades to
come to a standstill.
1. To remove the battery (9) from the device, press
the release button (9a) on the battery and pull the
battery out.
2. To insert the battery (9), push the battery along
the guide rail into the device. You will hear it click
into place.
Switching on and off
1. Place the apparatus on a level surface.
2. Lift the cover (8) on the device housing and
insert the charged batteries (9) along the guides into
the device. You will hear them click into place.
3. Insert the ignition key (10) in the corresponding
opening next to the rechargeable battery (9).
The ignition key can only be inserted in one
position. Take note of the guide groove on the open-
ing next to the battery and on the ignition key (10)
4. Before switching the apparatus on, make sure
that it is not touching any objects.
5. To switch the apparatus on, press the release
button (16) and hold it down while pressing the
starting lever (17).
Let go of the release button.
6. To switch the apparatus off, let go of the starting
lever (17).
After switching off the equip-
ment, the blade continues to
turn for several seconds. Do
not touch the moving blade.
There is a risk of injury.
Working with the device
Regular mowing stimulates the grass to an
increased leaf formation, while at the same time
killing weeds. Therefore, the lawn becomes denser
after each mowing process, resulting in an evenly
loadable lawn.
The first cut takes place roughly in April when the
grass is about 70 - 80 mm high.
During the main growing season, the lawn is mowed
at least once a week.
• Move the device at walking speed and in lines
which should be as straight as possible. For a