Elem Garden Technic TDE36V37P-LI, Translation Of The Original Instruction, Page: 61 / 74

61
Adjusting the Cutting Height
C
WARNING:
• Never put your hand or leg under the mower unit when adjusting the mowing height.
• Always make sure that the lever fits in the groove properly before operation.
Make sure that the protrusion on the mowing height adjusting lever fits in the groove in the mower.
NOTE:
• The mowing height figures should be used just as a guideline, as the state of the lawn or ground may
cause lawn height to be slightly different to the set height figure.
• Try a test mowing of grass in a less conspicuous place to get your desired height.
Cutting grass I
Overload when mowing the engine.
The engine is equipped with a safety switch that is activated when
the blade jammed, clogged or the motor is overloaded. Turn off the
machine when this happens.
The safety switch will only reset when you release the shifter first
Remove all obstacles, and wait one minute, then restart your
Machine , you can reset the safety switch.
● You Wear gardening gloves whenever you handle in the area of
sharp knives or work.
NOTE wait: If you reset the safety switch and the starting switch.