2
the supply flexible cord away from
the cutting line.
In accordance with essential
applicable safety standards of
European directives
This appliance is double insulated;
therefore no earth wire is required.
Always check that the power
supply corresponds to the voltage
on the rating plate.
Additional safety instructions for grass
trimmers
Warning!
Cutting elements continue to rotate
after the motor is switched off.
- Be familiar with the controls and the proper
use of the appliance.
- Before use, check the power supply cord
and extension cord for signs of damage,
ageing and wear. If a cord becomes
damaged during use, disconnect the cord
from the mains supply immediately.
DO
NOT TOUCH THE CORD BEFORE
DISCONNECTING THE SUPPLY.
- Do not use the appliance if the cords are
damaged or worn.
- Wear stout shoes or boots to protect your
feet.
- Wear long trousers to protect your legs.
- Before using the appliance, check that your
cutting path is free from sticks, stones, wire
and any other obstacles.
- Only use the appliance in the upright
position, with the cutting line near the
ground. Never switch the appliance on in
any other position.
- Move slowly when using the appliance. Be
aware that freshly cut grass is damp and
slippery.
- Do not work on steep slopes. Work across
the face of slopes, not up and down.
- Never cross gravel paths or roads while the
appliance is running.
- Never touch the cutting line while the
appliance is running.
- Do not put the appliance down until the
cutting line has come to a complete
standstill.
- Use only the appropriate type of cutting line.
Never use metal cutting line or fishing line.
- Be careful not to touch the line trimming
blade.
- Take care to keep the mains cable away
from the cutting line. Always be aware of
the position of the cable.
- Keep hands and feet away from the cutting
line at all times, especially when switching
on the motor.
- Before using the appliance and after any
impact, check for signs of wear or damage
and repair as necessary.
- Never operate the appliance with damaged
guards or without guards in place.
- Take care against injury from any device
fitted for trimming the filament line length.
After extending new cutter line always
return the machine to its normal operating
position before switching on.
- u Always ensure that the ventilation slots
are kept clear of debris.
- Do not use the lawn trimmer (edge
trimmer), if the cords are damaged or worn.
- Keep extension cords away from cutting
elements.
Warning! Switch off,
remove plug from mains
before adjusting,
cleaning or if cable is cut,
damaged or entangled.
The cutting line
continues to rotate for a
few seconds after the
trimmer is switched off.
Caution – do not touch
rotating cutting line.
WARNING: Packaging
materials are not toys!
Children must not play
with plastic bags! Danger
of suffocation!
