Elem Garden Technic 5411074169343, Original Instructions Manual

Page: 133 / 181

Page 133 de 181
4.5 CUTTING HEIGHT ADJUSTING LEVER
There are five positions for this lever,
shown as
«1» to «5» on the plate, which
correspond to various
cutting heights from 3.5 to 7.5 cm.
---
To go from one position to another,
move the lever sideways and put it back in one of the stop notches.
4.6 LEVER ENGAGEMENT AND BRAKE OF BLADE
The lever has two positions, as shown on the
plate:
---If the blade is engaged when safety conditions have
not been complied with, the engine shuts down and
cannot be restarted (
☛
5.2).
--- In disengaging the blade (Pos. «A»), a brake is
simultaneously activated which stops their rotation within
a few seconds.
4.11 KEY IGNITION SWITCH
This key operated control has three positions:
《
《 《
《
stop
stop stop
stop
》
》 》
》
everything is switched off;
《 《 《 《
on
on on
on
》 》 》 》
activates all parts;
《 《 《 《
start start start start
》 》 》 》
engages the starter
4.5
4.6
A
B
4.11