Page 6
EA Elektro-Automatik GmbH
Helmholtzstr. 31-37 • 41747 Viersen
Germany
Fon: +49 2162 / 3785-0
Fax: +49 2162 / 16230
www.elektroautomatik.de
ELR 9000 HP Series
1.4
Disposal of equipment
A piece of equipment which is intended for disposal must, according to European laws and regulations (ElektroG,
WEEE) be returned to EA Elektro-Automatik for scrapping, unless the person operating the piece of equipment or
another, delegated person is conducting the disposal. Our equipment falls under these regulations and is accord-
ingly marked with the following symbol:
1.5
Product key
Decoding of the product description on the label, using an example:
ELR 9 1500 - 30 HP 3U
Construction (not printed everywhere):
3U
= 19” rack enclosure with 3 units of height
Version:
HP
= Higher power (compared to series ELR 9000)
Maximum current of the device in Ampere
Maximum voltage of the device in Volt
Series :
9
= Series 9000
Type identification:
ELR
= Electronic Load with Recovery
1.6
Intended usage
The equipment is intended to be used, if a power supply or battery charger, only as a variable voltage and current
source, or, if an electronic load, only as a variable current sink.
Typical application for a power supply is DC supply to any relevant user, for a battery charger the charging of vari-
ous battery types and for electronic loads the replacement of Ohm resistance by an adjustable DC current sink in
order to load relevant voltage and current sources of any type.
•
Claims of any sort due to damage caused by non-intended usage will not be accepted.
•
All damage caused by non-intended usage is solely the responsibility of the operator.