© EA Elektro-Automatik in 2022, this information is subject to change without notice
11
06230900_manual_ps_10000_4u_30kw_en_01
1.8.3
Specific technical data
General
specifications
AC Input
Voltage, Phases
208 V / 380 V / 400 V / 480 V ±10%, 3ph AC (208 V 3ph AC with Derating to 18 kW)
Frequency
45 - 66 Hz
Power factor
>0.99
Leakage current
<10 mA
Overvoltage category
2
Pollution degree
2
DC Output static
Load regulation CV
≤0.05% FS
(0 - 100% load, constant input voltage and constant temperature)
Line regulation CV
≤0.01% FS
(208 V - 480 V AC +10% input voltage, constant load and constant temperature)
Stability CV
≤0.02% FS
(Over 8hrs interval following 30 minutes warm-up, constant input voltage, load and temperature)
Temperature coefficient
CV
≤30ppm/°C
(Following 30 minutes warm up)
C
ompensation (Remote Sense)
≤5% U
Nominal
Load regulation CC
≤0.1% FS
(0 - 100% load, constant input voltage and constant temperature)
Line regulation CC
≤0.01% FS
(208 V - 480 V AC +10% input voltage, constant load and constant temperature)
Stability CC
≤0.02% FS
(Over 8hrs interval following 30 minutes warm-up, constant input voltage, load and temperature)
Temperature coefficient
CC
≤50ppm/°C
(Following 30 minutes warm up)
Load regulation CP
≤0.3% FS
(0 - 100% load, constant input voltage and constant temperature)
Load regulation CR
≤0.3% FS + 0.1% FS current
(0 - 100% load, constant input voltage and constant temperature)
Protective functions
OVP
Overvoltage protection
adjustable, 0 - 110% U
Nominal
OCP
Overcurrent protection
adjustable, 0 - 110%
I
Nominal
OPP
Overpower protection
adjustable, 0 - 110%
P
Nominal
OT
Overtemperature protection,
output shuts down in case of insufficient cooling
DC Output dynamic
Rise time 10 - 90% CV
≤20 ms
Fall time 90 - 10% CV
≤20 ms
Rise time 10 - 90% CC
≤10 ms
Fall time 90 - 10% CC
≤10 ms
Display accuracy
Voltage
≤0.05% FS
Current
≤0.1% FS
Insulation
AC Input to DC Output
3750 Vrms (1 Minute), creepage distance >8 mm
AC Input to case (PE)
2500 Vrms
DC Output to case (PE)
Depending on the model, see model table
DC Output to Interfaces
1000 V DC (Model up to 360 V output), 1500 V DC (Model from 500 V output)
Interfaces digital
Built-in, galvanically isolated
USB, Ethernet (100 MBit) for communication
1x USB Host
for data acquisition
Optional, galvanically isolated
CAN, CANopen, RS232, ModBus TCP, Profinet, Profibus, EtherCAT, Ethernet
Interfaces analog
Built-in, galvanically isolated
15-pole D-Sub
Signal
range
0 - 10 V or 0 - 5 V (
switchable
)
Inputs
U, I, P, R,
remote control on/off, DC output on/off, resistance mode on/off
Outputs
Monitor U and I, alarms, reference voltage, status DC output, status CV/CC
Accuracy
U / I / P / R
0 - 10 V ≤0.2%, 0 - 5 V ≤0.4%
Device configuration
Parallel operation
Up to 64 units of any power class in series 10000, with Master-Slave-Bus and Share-Bus
