18
3. CONTROL (DISPLAY) PANEL & INDICATION INFORMATION
The control panel functions are protected from unauthorized tampering by a lockable
see through control cover in the overhead main Control Unit. Operators should not
normally need to adjust these controls, which should only be altered by a supervisor or manager in
order to change the sensitivity settings of
ThruScan
, reset counters, perform installation
adjustments and to switch the unit on /off etc.
3.1 CONTROL PANEL
The control display panel provides a visual indication of the status of the unit as well as all controls
necessary for the programming and operation of the unit. The following features can be found on
the display panel.
3.1.1
LCD (LIQUID CRYSTAL DISPLAY-SCREEN)
The LCD is an ongoing visual display located in the overhead Control Unit. The LCD displays the
security level settings and traffic count of both incoming and outgoing traffic. The display also
provides operational information, including program settings and adjustment information together
with fault indication and alarm displays.
3.1.2 GRAPHIC (ALARM) ZONE LED’s (LOCATOR)
The display panel gives a graphical indication of the area of any
alarm activation by indicating whether the point of detection is on
the right, left or centre of the body and also whether it is at a high,
middle or low level.
VU-METER
MMETREDIS
PL
mmeterMete
r
GLCD
SCREEN
GRAPHIC ALARM (LOCATION
IDENTIFIER) LED’S
ON-OFF
BUTTON
IR REMOTE
CONTROL
SENSOR
UPS
TRAFFIC LIGHTS
INDICATOR
RUN / SEL/ UP/ DOWN
BUTTONS
LINK LIGHTS
Transparent Red
