Single-side powered
heating cables
The cables nameplates sticker always show the
rated voltage for each heating cable.
Note:
Never
bend the joint and end seal.
Never
cut the heating cable.
Never
trim the heating cable, only the power
supply conductor may be trimmed if required.
Never
squash the “cold tail”.
Do
not ever
undertake on your own any attempts
to repair the heating cables, and in case any
damage is detected, report the damage to
an ELEKTRA authorized installer.
Never
stretch or strain the cable excessively,
nor hit it with sharp tools.
Do
not
install the heating cables when ambient
temperature drops below 23°F (-5°C).
!
The label features the following pictograph:
IPX 7
CODE:
DATE: week/year
HEATING CABLE FOR OUTDOOR APPLICATIONS
SNOW & ICE PROTECTION
Model: VCD 25/150 240VAC
240 VAC 0.6A 384.0 ohm
7.5 W/ft (25 W/m) 150W
19.7 ft (6.0 m)
REFER TO INSTALLATION INSTRUCTIONS
CAUTION: a ground fault protection device must
be used with heating device
ATTENTION: ce produit doit etre utilise avec une
protection de mise a la terre
Minimum instalation temperature 23°F (-5°C)
_ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _
5906726706460
Self-adhesive label
5
