Guangzhou Electway Technology Co., Ltd.
www.electway.net
5. Function and Features
1)The communication board has the high-speed CAN net work can communicate with BMS of the
electric car and complete the charger charge control.It used to judge the power battery type of the
electric car and obtains the systematic parameter and also obtains the status data of the power
battery’s voltage,current and temperature in the course of charging and before charging.
2)2.8 inches LCD touch screen display with indicator function,which can real-time display the
remaining battery power,charging voltage charging current,remaining charging time and the
charger’s failure state.
3)Two buttons complete charge (on/off)can change and set up the charger’s parameter.Please
refer to the seventh part of the manual (Human-computer b interation)
4)The charger equipped with emergency stop system,it can cut off the output current at the first
time in an emergency.Please check 2-1for reference.
5)The air switch can cut off the AC input.Please check 2-1 for reference.
6)The connect between AC input charger connector and DC output charger are detachable
connector.The user can put the input cable and output cable stored separately.
7)The Charger can filling the electricity 30 ~ 45 degrees per hour commonly,general cars can be
recharged in 0.5~ 1 hours and the bus need 2~3.5 hours.
8)Please notice that the air duct can not toward to ground or be blocked.As the figure 6-1 for
reference.
figure 6-1
8
