background image

Guangzhou Electway Technology Co., Ltd.

www.electway.net

4

Ending charging

16. According to the message send from the battery management system (BMS), this charger stops charging
automatically.
17.In emergency cases, you can press the “stop button”, and push the input interface - air switch to "off"
status to end this charging.
18. If needs to stop charging manually, you can press the "stop charging button". Switch off the air after at least
5 seconds, and then pull out the charging gun. Finally remember to shut off the power.

8. Safety Caution

1) The users of the charger should read this manual carefully before using this charger.
2)The charger is a high voltage equipment which has a certain dangerous nature.The laypeople and juveniles
are prohibited to use.
3)The charger should be away from the dangerous.Such as fire,LEL,rain smoke,dust,snow ect.
4)Check the charger around 12~20cm whether there is anything block the charger ’ s air duct.Ensure the
charger in a ventilation and heat dissipation condition.Avoid using work in direct sunlight, high
temperature,rain,splash,snow condition ect.
5)Put the charger in the safe place,both put it in the car (included the car boot)and on the ground directly are
prohibited.
6)Directly unplug the connector is prohibited when it is charging.Both disconnect the ac input cable, dc output
cable directly and drag the charger cable, touch,move the charger are prohibited.
7)Remove the charger is prohibited without the consent of the company.If there is any safety accident ,all at
your fault.

9. After-sales service plan

1)In the warranty period, if it is the problem by the company manufacture or installation, the company is
responsible for free repair or replacement
2)Free maintenance period is 1 year after the completion of the time for delivery. In this period, our company
is responsible for the maintenance and debugging of the device if the device has quality problems.
Maintenance costs and unqualified parts replacement fee shall be borne by our company.
3)After the product delivered, our company will track the product. And we set up customer file CARDS and
complaints hotline to offer satisfied service for the customer.
4)Due to damage of the goods caused by the improper use by customer, our company sales staff will sign the
maintenance contracts with customers. According to maintenance contracts, technical maintenance section is
responsible for the maintenance task on schedule.
5)In addition to the warranty period of after-sales service, our company will be in charge of after the warranty
period of equipment maintenance work, but
after-sales service fee shall be borne by the buyer
6)After the product delivered, artificial damages such as product appearance, cable, circuit breaker, cable
connectors do not belong to warranty service.
7)Customer should be responsible for safety problems caused by dismantle the charger by personally.In the
warranty period will not be free after-sales service.

12

Summary of Contents for CHR-30Q
















Reviews: