Page 2 of 24 MEL-TEMP M8160 Issue 1.5
Please take your time to read your MEL-TEMP Digital Melt Point Apparatus
instruction book in order to understand the safe and correct use of your new
Electrothermal product.
It is recommended the Responsible Body for the use of this equipment reads this
Instruction book and ensures the user(s) are suitably trained in its operation.
CONTENTS
Section 1
Introduction
Page 3
Section 2
Symbols and using this Instruction book
Page 4
Section 3
Safety Information.
Page 5
Section 4
Unpacking and contents
Page 7
Section 5
Installation
Page 8
Section 6
Environmental Protection.
Page 9
Section 7
Product Operation.
Page 10
Section 8
Technical Specification.
Page 17
Section 9
Maintenance
Page 19
Section 10
Customer Support
Page 21
Section 11
Spares and Accessories
Page 22
Section 12
EC declaration of Conformity Notes
Page 24
Appendix A
Decontamination Certificate.
Page 23
©
The copyright of this Instruction book is the property of Electrothermal. This instruction book is supplied by
Electrothermal on the express understanding that it is to be used solely for the purpose for which it is supplied. It
may not be copied, used or disclosed to others in whole or part for any purpose except as authorized in writing by
Electrothermal. Electrothermal reserve the right to alter, change or modify this instruction book without prior
notification.
In the interest of continued development Electrothermal reserve the right to alter or modify the design
and /or assembly process of their products without prior notification.
This product is manufactured in Great Britian by Electrothermal. Part of the Bibby Scientific Group of
companies. Registered address
Electrothermal.
Electrothermal House.
Unit12A, Purdeys Way.
Purdeys Industrial Estate.
Rochford,
Essex. SS4 1ND
Great Britain.
Tel +44(0)1702 303350
Fax+44(0)1702 468731
