www.linksprite.com
22
/
50
Transparent Transmission Mode
This is the transmission format of the serial data. This transmission mode can be set to enabled
or closed. It must be noted that the transparent transmission mode can only be supported when
automatic connection mode is used and the server data format is UDP. Otherwise, this
parameter can be ignored.
Serial Baud Rate
It defines the data rate of the serial port. It configures the serial transmission data rate of the
WLAN module. Please refer to the serial port setting in the server software for more information
on the serial data rate setting of the client software. The data rates on both sides of the
communication must be same. Otherwise the communication between the client software and
module becomes impossible.
3.5. Automatic Connection
