www.linksprite.com
15
/
50
Disable TCP Monitoring
After associating with the AP, the WLAN module automatically connects to the server defined in
the network parameters, and returns the message of successful connection to user. If the
connection fails, it returns a failure message. The procedure of the WLAN module is the same
as that in Version 1.3 and older versions which do not support the TCP Monitoring mode.
Enable TCP Monitoring
After connecting with the AP, the WLAN module returns the message of successful connection
to user. Then WLAN module enters TCP Monitoring mode, and can accept external TCP
connection requests. If user wishes it works as the client to connect to the server, the server can
use TCP connection command to initiate the connection request.
This module does not support multiple TCP connections at the same time. If currently a TCP
connection is in place, it can no longer receive or send new connection requests.
