www.linksprite.com
43
/
50
FLG
：
0x47
RES
：
No defined
4.4. Configuration parameters
WLAN module’s configuration parameters are defined as follows.
4.4.1. System parameters
Baud rate
Its length is 1 byte. It defines the baud rate of the UART serial port in bps,
0
－
19200
，
1
－
38400
，
2
－
57600
，
3
－
115200
Auto Connect
Its length is 1 byte. It defines the connection mode of the WLAN module, 0
－
manual
，
1
－
automatic.
Transparent
Its length is 1 byte. It defines the transparent transmission mode, 0
－
close,1
－
enable
（
this
mode is only valid in automatic connection mode and UDP data format
）
.
TCP Server Mode
Its length is 1 byte. It defines the TCP monitor mode, 0
－
close,1
－
enable (this mode is only
valid in TCP data format).
4.4.2. Network parameters
This module supports up to 7 groups of network parameters, so there are 7 network parameter
configurations, whose indexes are 1~7. Each group of parameters includes:
BSSID
Its length is 6 bytes. It defines BSSID of the target network. Its value is the MAC address of the
AP used by the target network.
Channel
Its length is 1 byte. It defines the channel of the target network, its valid value range is 1~14.
