www.linksprite.com
21
/
50
Network parameters include the parameters needed to connect to AP and server. This module
supports 7 groups of network parameters. These parameters are defined as follows.
Parameter Index
This is the group number of the network parameter.
Channel
、
SSID
、
Encryption style
、
Key
These are all the configuration parameters; please refer to the setting of AP.
BSSID
This is MAC address of the target AP.
The data format of Link Layer
This is the data format used by the transmission between the WLAN module and the server.
The setting of the client must be same as the setting of the server. (Note: the server software in
this testing system can only support UDP and TCP data formats.)
Local IP address
This is the IP address of the WLAN module. It is arbitrarily defined by user, but it must be a valid
IP address of the target AP and is not used by other devices.
It is worth noting that this IP address has nothing to do with the IP address of the network card
of the tester1 computer, on which client software runs.
Subnet Mask
This is the subnet mask of the network that the WLAN module connects to.
Gateway IP Address
This is the gateway IP address of the network that the WLAN module connects to.
Server IP Address
This is the IP address of the network card of tester2 computer.
Service Port
This is the port number of the server. This setting must be the same as the server port number.
There is only one set of system parameters. They are used to control the work mode of WLAN
module.
Connection Mode
Users can choose auto or manual connection mode.
