manualshive.com logo in svg

Electronics Diversified SMART, User Manual

Share
Download
Electronics Diversified SMART User Manual Download Page 43

SMART System

PASSWORDING

CHANGING PASSWORDS

42

The SMART System uses password protection
to prevent  unwanted clearing and editing of
the system. The default password is four hits
in the upper left button on the Master Station.
This password can be changed for increased
protection. All buttons on the faceplate are
accessible to making a new four digit code.
For password enabling, turn to page 32.

From Preset Screen,

Press Menu.
Press Password.
Type in Old four digit
password.
Type in New password
Type in New password
again.
After OK, press Menu to
return to Preset Menu.

  Lockouts
        Timers
Password
         Config

Clear Sys
Stations
Dim Patch
Combines

              Password  OK
    Old Password:  ****
   New Password: ****
   New Password: ****

    Old Password:  ****

NOTE: DO NOT TURN THE SMART
SYSTEM OFF DURING ANY PART
OF PROGRAMMING IN THE
PASSWORD.
If inaccurate information is placed in
the SMART System, it will return
back to the Menu Screen.

Summary of Contents for SMART
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands