manualshive.com logo in svg

Electronics Diversified SMART, User Manual

Share
Download
Electronics Diversified SMART User Manual Download Page 34

SMART System

LOCKOUTS

Lockout 2 now must be linked to the other
presets to unlock the 10-Button station. To
setup Lockout 2 to the other stations:

Select preset 2 in room 1:

Press  Preset.
Press Up button to select preset 1.

Select Lockout 1:

Press  Lockout.
Use Up/Down buttons to select lockout
action 2.

Repeat the same action for presets 3
through 13 (OFF is 13). Now all presets except
preset 1 will lock the station. Remember once
the station is locked out, it is inoperable and
must be unlocked by another station.

33

 +Min
   +10
    -10
  -Min

Rm 1
Pr 2
Name   PR2
Lockout 2

 +Min
   +10
    -10
  -Min

Rm 1
Pr 2
Name   PR2
Lockout 1

EXAMPLE: A ONE PRESET
LOCK

For this example, the SMART System will
lock and unlock the same 10-Button station
in a single room. The system  will be setup
such that presets  located on the left hand
side of the controls (presets 1, 2, 3, 7, 8, 9,
and OFF) will lock the 10-Button, and
presets on the right hand side (presets 4, 5,
6, 10, 11, and 12 ) will unlock. In this
example, the 10-Button station will be on
address 0.

TO SETUP:

  Lockouts
        Timers
Password
         Config

Clear Sys
Stations
Dim Patch
Combines

From Preset Menu,
To Setup a Lockout Action to
lock the 10-Button,

Press Menu.
Press Lockouts.

Summary of Contents for SMART
















































Reviews:

No comments

Brands by name

Popular brands

Load more brands